This unit uses the Harris bronze pelton runner and the Harris housing. All hardware is stainless steel, and nozzle holders and nozzles are brass.The alternator is a brushless permanent magnet, 12 pole, with 2 x 6203 sealed bearings.

We offer 4 models that can generate 12V, 24V, 48V, or 96V with 1 - 4 nozzles and will work on pressures from 20psi to 180psi.

The alternating current from the alternator goes through the water-cooled rectifier to produce DC for your battery.The unit comes complete with an induction ampmeter and 1'' flexible hose for easy hook-up. We recommend fusing the wire near the batteries.

We warranty the unit for 2 years.

Bearings should be changed every 4 - 10years, depending on use.

Click here for the OUTPUT TABLE